Raritan DOMINION SX -, User Manual

Page: 53 / 226

C
HAPTER
7: P
ORT
C
ONFIGURATION AND
P
ORT
A
CCESS
A
PPLICATION
35
Anonymous Port Access
Anonymous port access allows users to access DPA configured ports without entering a password.
To enable the feature:
1.
Click the
Security
tab, and then click
Login Settings
. The Login Settings screen appears
(Figure 54).
2. Make sure the
Anonymous Port Access
checkbox at the bottom of the screen is checked.
3. Click the
User Management
tab, and the click
User Group List
. The Group List appears
(Figure 20).
Note: Refer to Chapter 5 for additional information about user groups.
4. Click
Add New User Group
. The New Group screen appears (Figure 21).
5. Type
Anonymous
in the
Group Name
field.
6. Select
Observer
from the drop-down menu in the
Class
field.
7.
Select
the ports for which you want anonymous port access in the
Port Access
field.
8. Click
OK
.
Important: The Dominion SX unit must be rebooted to apply new direct port access
settings.
Raritan Serial Console
Use the following steps to launch the Raritan Serial Client (RSC).
1. Select the
Port Access
tab.
Figure 29 Port Access Screen
2. Click on the
Name
of the port you want to access for the RSC, for example, Port1 or Port2.
Note: A Security popup screen appears only if you used https to connect to the RSC.
3. Click
Yes
. A
Warning – Security
popup screen appears.
4. Click
Yes
to access the Raritan Serial Client from the Port Screen.
Note: If you click Always, you will not receive the security screen for future access.
The Raritan Serial Console window appears. Refer to the Raritan Serial Client Interface section in
this chapter.