Raritan DOMINION SX -, User Manual

Page: 124 / 226

106 D
OMINION
SX U
SER
G
UIDE
Note:
When configuring the LDAP server, the query string format on the server should contain
the name of a group configured on the SX.
When configuring the Radius server, the Filter-ID format for the users on the server
should have the following format “raritan:G{GroupOnSX}:D{DialbackNumber}“.
When configuring the server, the user-group format for the user on the server
should contain the name of a group configured on the DSX.
If you use older (SX 2.5 and older release ) formats of "op:1:2:4" or “a:*” , the system will
allow you to log in and will restrict the ports accessibility according to user types and their
limitations. The DSX will not have any database information about groups at this time and
will therefore display the following message in the banner after login.
Error: Cannot get group information
The port display will show all ports because there is no way for the client to know which
port limitations exist.
LDAP Configuration Menu
The
ldap
configuration menu provides access to setting up ldap and ldaps.
The ldap is entered by typing ldap at the following prompt:
admin > Config > Authentication > ldap
The ldap command options are described in Table 6.
Table 6 LDAP Command
C
OMMAND
O
PTION
D
ESCRIPTION
ldaps Switches to the ldaps menu which includes the
following commands:
getservercert
– FTP Retrieval of ldap certificate
removecert
– Remove LDAPS Certificate
viewcert
– View LDAPS Certificate
primaryldap
Used to configure the primary ldap settings.
secondaryldap
Used to configure the secondary ldap settings.
LDAP Command Example
admin > Config > Authentication > ldap
admin > Config > Authentication > ldap > ldaps
admin > Config > Authentication > ldap > ldaps > viewcert