Raritan DOMINION SX -, User Manual

Page: 47 / 226

C
HAPTER
6: R
EMOTE
A
UTHENTICATION
29
8.
If you are using a modem to connect to the LDAP server, type a dialback string in the
Dialback Query String
field.
9.
If you have a backup LDAP server, enter the same information in the
Secondary LDAP
fields.
10.
Click
OK
. LDAP authentication is enabled.
Configuring
You can use the Terminal Access Controller Access-Control System Plus () to
authenticate DSX users instead of local authentication. To configure :
1.
Click the
Setup
tab, and then click
Remote Authentication
. The Remote Authentication
screen appears. It contains a panel.
Figure 24 Panel
2.
In the panel, click the button to enable authentication.
3.
Under Primary , type the IP address of the server and the port it is
listening on (default is 49) in the
IP Address
and
Port
fields.
4.
Type the root password to access the directory server/manager in the
Secret
field. The name
for this field depends on the Directory Server. For example, Microsoft Windows Active
Directory refers to the field as
Password
, while the SUN iPlanet directory server uses
Secret
.
5.
If you have a backup server, enter the same information in the
Secondary
fields.
6.
Click
OK
. authentication is enabled.