Raritan DOMINION SX -, User Manual, Page: 127 / 226

C
HAPTER
12: C
OMMAND
L
INE
I
NTERFACE
109
nfsget Command
The
nfsget
command gets an NFS encryption key to be used for encrypting port log data. Use the
key value as input to the nfssetkey command.
The syntax of the nfsget command is:
nfsgetkey [type <rc4|aes128>]
The nfsget command options are described in the following table.
Table 10 nfsget Command
C
OMMAND
O
PTION
D
ESCRIPTION
type <rc4|aes128>
Type of encryption key used for encryption (rc4 or aes128)
nfsget Command Example
admin > Config > Log > nfsgetkey type aes128
nfssetkey Command
The
nfssetkey
command sets the type of encryption and the key. NFS is notoriously insecure. It
can be accessed easily and the data misused. With Dominion SX, the administrator has the ability
to encrypt the data stored on the NFS server. Consequently, if the data were to be accessed
inappropriately, it would be of no use to anyone without the encryption key used to encrypt.
The key can be set and obtained from the DSX only.
The syntax of the nfssetkey command is:
nfssetkey [type <rc4|aes128>] [key string]
The nfssetkey command options are described in Table 11.
Table 11 nfssetkey Command
C
OMMAND
O
PTION
D
ESCRIPTION
type <rc4|aes128> Type of encryption type to be used
key string Provide key string to be used for encryption
Note: aes128 is not supported in 3.0.
Command Example
admin > Config > Log > nfssetkey type aes128 key
D2F05B5ED6144138CAB920CD