Raritan DOMINION SX -, User Manual

Page: 37 / 226

C
HAPTER
4: N
ETWORK
S
ETTINGS AND
S
ERVICES
19
Add a New Static Route
To add a new Static Route:
1.
Click the
Setup
tab, and then click
Static Routes
. The Static Routes screen appears. It
consists of an Enable IP Forwarding panel and a Static Routes List.
Figure 16 Static Routes List
2. Go to the Static Routes List and click
Add New Route
. The Static Route screen appears.
Figure 17 Static Route Screen
3. On a DSX with one LAN interface,
LAN1
appears automatically in the
Interface
field. On a
DSX with two LAN interfaces, select the one you want from the drop-down menu In the
Interface
field.
•
LAN1 = eth0
•
LAN2 = eth1
4. Type the IP address, subnet mask, and gateway of the destination host in the
Destination
,
Mask
and
Gateway
fields.
5. Type the TCP maximum segment size (MSS) in bytes in the
MSS
field.
6. Type th
e
TCP windows size for connections over this route in bytes in the
Window
field.
7. Type the initial round trip time (IRTT) for TCP connections over this route in
milliseconds(1-12000) in the
IRTT
field.
8. Select your route type from the
Flags
drop-down menu.
•
Host
means this route is for a host machine.
•
Net
means this route it for a subnet.
9. Click
OK
.