SCSI Commands: 21BLOG SENSE
Page
70
Flag
Condition Setting Flag
Condition
Clearing Flag
Flag Name
6
ASC/ASCQ per error list
Rewind or Unload
Write failure
7
Media life threshold breech of
lifetime specified loads or
lifetime specified usage hours.
Media removal
Media life
9
Received one of the following
write type commands while the
Media is write protected, for any
reason, HWP, SWP,
or
media/MIC failure that precludes
writing:
1. WRITE
2. WRITE FILEMARK
3. ERASE
4. SET CAPACITY
Media removal.
Note, while the
condition setting is
true each write type
command sets the
flag.
Write protected
10
Media Removal Set
and
one of
the following occurs:
1. Eject button pressed
2. Unload command received
Reset of Prevent
Media removal
or
media removal.
Note, while the
condition setting is
true the flag is set for
each eject button
press or Unload
command.
No removal
11
Valid cleaning media detected,
includes expired cleaning media
Media removed
Cleaning media
12
Media MIC not set for data or
cleaning media
Media removal
Unsupported
format
14
Tape snapped
None. Mechanical
removal of snapped
tape required.
Unrecoverable
mechanical
cartridge failure
15
Media MIC problem rendering
MIC usage not possible per MIC
spec or hardware spec
Media removal or
MIC problem
corrected
Memory chip in
cartridge failure
16
Eject button pressed
and
SCSI
command is aborted
Media removal
Forced eject
17
MIC/Servo info mismatch; Servo
head bad; MIC failure; media
generation not supported for
write.
Media removal
Read only format
18
Loading media and corrupt tape
directory detected
Media removal
Tape directory
corrupted on load
19
Media life within 98% of lifetime
specified loads or 90% lifetime
specified usage hours.
Media removal
Nearing media life
20
Read/Write problem that results
in flag 5 or 6 being set
Successful clean
cycle
Clean now
21
Power up and saved clean now
flag is set
or
tape moved exceeds
cleaning threshold
Successful clean
cycle
Clean periodic
Summary of Contents for LTO 4
Page 1: ......