![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212292.webp)
TAPE_WORM_BAD_CM
952h
Tape
The CM is not readable and the SMW indicates WORM cartridge
TAPE_WORM_BAD_CM_AND_FID_MISMATCH 953h
Tape
The CM is not readable, the SMW indicates Rd/Wr cartridge and
the FID indicates
SRV_VCM_HALL_DAMPING_FACTOR_NOT_WITHIN_
RANGE
954h
Servo
Damping Factor has to be between 0.25 to 0.35
SRV_SEEPROM_TEST_FAILED
955h
Servo
Data read back do not match the data written during the serial
EEPROM test
TAPE_AUTO_LOAD_INVALID_CM_LP1
956h
Tape
Tape Task detect invalid LP1 from CM
TAPE_AUTO_LOAD_INVALID_SRV_LP1
957h
Tape
Tape Task detect invalid LP1 from Servo
MIC_BAD_PROTECTED_PG_TBL 958h
Medium
Auxiliary
Memory
protected page table corrupted
MIC_BAD_UNPROTECTED_PG_TBL 959h
Medium
Auxiliary
Memory
corrupted unprotected page table
SCSI_ECHO_BUFFER_HAS_NOT_YET_BEEN_WRITTE
N
95Ah
SCSI
Write Buffer command must write to echo buffer before Read
Buffer may read it.
SCSI_ECHO_BUFFER_IID_MISMATCH
95Bh
SCSI
The IID for the Read Buffer command must match that of the
Write Buffer command
SRV_HW_SQRT_ILLEGAL_RADIX 95Ch
Servo
SRV_HW_SQRT_TIMEOUT 95Dh
Servo
SRV_HW_SQRT_INVALID_SCALE 95Eh
Servo
SCSI_BOGUS_SIZE_DESC_RETRY_CNT_THRESHOLD
_BREACH
95Fh
SCSI
Read command bogus size error threshold has been breeched
MIC_PARTIAL_INIT_LTO1 960h
Medium
Auxiliary
Memory
LTO1 data CM is partially init or corrupted
MIC_PARTIAL_INIT_LTO2 961h
Medium
Auxiliary
Memory
LTO2 data CM is partially init or corrupted
MIC_PARTIAL_INIT_LTO3 962h
Medium
Auxiliary
Memory
LTO3 data CM is partially init or corrupted
SRV_SPI_INTF_A_BUSY
963h
Servo
When SPI controller is busy
TAPE_PHYS_LP3_EXCEED_MAX
964h
Tape
Physical LP3 exceeds maximum limit
SRV_EXPECTED_TO_BE_OFF_HEAD_STEPPER_SEN
SOR
965h
Servo
Goto head stepper sensor sequence was expecting to not be on
sensor.
SRV_EXPECTED_TO_BE_ON_HEAD_STEPPER_SENS
OR
966h
Servo
Goto head stepper sensor sequence was expecting to be on
sensor.
SRV_NEVER_GOT_OFF_HEAD_STEPPER_SENSOR 967h Servo Goto
head stepper sensor sequence expected to untrip the
sensor.
SRV_NEVER_GOT_ON_HEAD_STEPPER_SENSOR 968h Servo
Goto head stepper sensor sequence expected to trip the sensor.
DSM_WORM_APPEND_NOT_ALLOWED 969h
Data
set
manager
Append attempt violates WORM rules.
DSM_WORM_APPEND_NOT_ALLOWED_INVALID_HE
ADER
96Ah Data
set
manager
Write from BOT violates WORM rules.
SRV_UNABLE_TO_FIND_SERVO_BAND
96Bh
Servo
Closed loop head positioning failed to locate a servo band
SRV_WRL_INTF_BUSY 96Ch
Servo
SRV_PLACE_HOLDER 96Dh
Servo
TRK_INVALID_ERROR_ALERT_RECEIVED
96Eh
General
Display when invalid error is received in TRACKING_TASK
SRV_TRK_LOG_FULL 96Fh
Servo
SRV_TRK_ABORT 970h
Servo
SRV_TRK_TASK_BUSY 971h
Servo
SRV_TRK_UNEXPECTED_MESSAGE_RESPONSE 972h Servo
TRK_INVALID_ALERT_RECEIVED 973h
General
SRV_REJ_PARM_LP1_OR_LP6_OUT_OF_RANGE 974h Servo SET_TAPE
command rejected because LP1 or LP6 out of range
SRV_MODE_DEPENDENT_REGS_COUNT_IS_INCORR
ECT
975h Servo
SRV_SPEED_DEPENDENT_REGS_COUNT_IS_INCOR
RECT
976h Servo
Summary of Contents for LTO 4
Page 1: ......