![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212186.webp)
SCSI Commands: 40BREQUEST SENSE
Page
178
Sense
Key
Byte 2
ASC
Byte 12
ASCQ
Byte 13
Message
Explanation
07h 74h
02h
Unencrypted data found
while decrypting
Unencrypted block detected while
reading or verifying in Decrypt or
RAW mode.
07h 74h
03h
Incorrect data encryption
key
No valid decryption key available for
encrypted data block encountered
while reading or verifying the
current media.
08h Blank Check
08h 00h
05h
End-of-medium
detected
A READ or a SPACE command
terminated early because End of
Data was encountered.
08h
14h
03h
End-of-data not found
A Read type operation failed
because a format violation related
to a missing end-of-data data set
09h Vendor Unique
09h
00
05
VS End-of-data detected
Raw reader.
09h
80
80
VS Medium is present
PARK UNPARK command.
0Bh Aborted Command
0Bh 08h
00h
Logical unit
communications failure
Unable to communicate with logical
unit.
0Bh 08h
01h
Logical unit
communication time out
Internal task communication timed
out.
0Bh 1Bh
00h
Synchronous data transfer
error
Data transfer error on parallel SCSI.
0Bh 3Dh
00h
Invalid bits in identify
message
An illegal Identify message has
been received by the drive at the
start of a command.
0Bh 43h
00h
Message
error
A message could not be sent or
received due to excessive trans-
mission errors.
0Bh
45h
00h
Select or reselect failure
An attempt to reselect an initiator in
order to complete the command has
failed.
0Bh
47h
00h
SCSI parity error
Parity error on parallel SCSI.
0Bh 48h
00h
Initiator detected error
message received
A command failed because an
Initiator Detected Error message
was received.
0Bh 49h
00h
Invalid
message
error
The command failed because an
invalid message was received by
the drive.
0Bh
4Ah
00h
Command phase error
A command could not be executed
because too many errors occurred
in the Command phase.
0Bh
4Bh
00h
Data phase error
A command could not be completed
because too many errors occurred
during the Data phase.
0Bh 4Dh
NNh
Tagged overlapped
commands (NN = Queue
Tag)
An initiator sent the drive a new
command although the initiator had
a command with the same Task ID
outstanding in the drive.
0Bh 4Eh
00h
Overlapped commands
attempted
An initiator selected the drive
although the initiator had a com-
mand outstanding in the drive.
Summary of Contents for LTO 4
Page 1: ......