![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212214.webp)
SCSI Commands: 45BSEND DIAGNOSTIC
Page
206
3.33.2
SEND DIAGNOSTIC Completion Status
Code Message Description
00h
Good
Status
•
The drive is ready to perform any appropriate command.
•
The drive remains in any previously set mode.
•
The tape position is not changed.
02h
Check
Condition
Use the REQUEST SENSE command to retrieve status information.
Possible Sense Keys are:
Code Message
Description
02h
Not Ready
No cartridge is inserted in the drive.
04h
Hardware Error
Drive hardware failure detected.
05h
Illegal Request
The CDB contains an invalid bit field or the
parameter list length is invalid or the
parameter list contains an invalid field.
06h
Unit Attention
The cartridge was changed, or the drive was
reset prior to this command.
Summary of Contents for LTO 4
Page 1: ......