SCSI Commands: 39BREPORT SUPPORTED TASK MANAGEMENT FUNCTIONS
Page
167
3.27.2.1
REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS Data
Field Descriptions
Field Bytes
Bits
Description
WAKES 0
0
Set indicates a \WAKEUP task management function is supported
by drive.
TRS 0
1
Set indicates a TARGET RESET task management function is
supported by drive.
QTS 0
2
Set indicates a QUERY TASK task management function is
supported by drive.
LURS 0
3
Set indicates a LOGICAL UNIT RESET task management function
is supported by drive.
CTSS 0
4
Set indicates a CLEAR TASK SET task management function is
supported by drive.
CACAS 0
5
Set indicates a CLEAR ACA task management function is
supported by drive.
ATSS 0
6
Set indicates an ABORT TASK SET task management function is
supported by drive.
ATS 0
7
Set indicates an ABORT TASK task management function is
supported by drive.
ITNRS 1
0
Set indicates an IT Nexus Reset task management function is
supported by drive.
3.27.3
REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS Completion Status
Code Message
Description
00h
Good
Status
•
The drive is ready to perform any appropriate command.
•
The drive remains in any previously set mode.
•
The drive accepts commands from any Initiator.
•
The tape position is not changed.
02h
Check
Condition
Use the REQUEST SENSE command to retrieve status information. Possible
Sense Keys are:
Code Message
Description
04h
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed, or the drive was
reset prior to this command.
Summary of Contents for LTO 4
Page 1: ......