Quantum LTO 4, User Manual

Page: 283 / 297

SRV_HW_DIVIDER_DIVIDE_BY_ZERO 7CCh Servo
SRV_HW_DIVIDER_OVERFLOW 7CDh Servo
SRV_TIMEOUT_DURING_HEAD_STEPPER_MOVING_T
O_POSITION_CL_FAR 7CEh Servo
SRV_TIMEOUT_DURING_HEAD_STEPPER_MOVING_T
O_POSITION_CL_NEAR 7CFh Servo
SRV_THR_LOAD_ARM_AT_OLD_SENSOR7 7D0h Servo Notification that Load Arm has passed the old Sensor 7 position
(between heads a
SRV_TRK_ACTIVE_FUNCTION_IS_NULL 7D1h Servo
SRV_TRK_UNEXPECTED_MESSAGE_RECV_CMD_ST
ATE 7D2h Servo
SRV_TRK_UNEXPECTED_MESSAGE_RECV_RESP_ST
ATE 7D3h Servo
SRV_TRK_UNEXPECTED_MESSAGE_SEND_RESP_ST
ATE 7D4h Servo
SRV_TRK_MAXIMUM_STATE_EXCEEDED 7D5h Servo
SRV_CMDPROC_INVALID_PDAC_MODE 7D6h Servo
SRV_MON_WRONG_NUMBER_OF_PARAMETERS 7D7h Servo
SRV_MON_INVALID_MODE 7D8h
Servo Only FIQ and IRQ modes are allowed
SRV_MON_INVALID_PDAC_NUM 7D9h Servo
SRV_MON_INVALID_SCALE 7DAh Servo
SRV_CMDPROC_INVALID_PDAC_NUM 7DBh Servo
SRV_SELF_INT_BAND_ID_TIMEOUT 7DCh Servo
SRV_TRK_BAND_ID_TIMEOUT 7DDh Servo
SRV_RESERVED 7DEh Servo Fibre Channel Port Signal Status
SRV_VAR_SPEED_ENABLE_REQUIRES_DRIVE_REA
DING_OR_WRITING 7DFh Servo
SRV_HEAD_BRUSH_IS_NOT_PRESENT 7E0h Servo
SRV_THR_HEAD_BRUSH_SENSOR_MISSING 7E1h Servo Head Brush sensor not detected
SRV_STEPPER_BUSY 7E2h Servo Stepper Motor is already busy.
SRV_THR_PIVOT_TRACK_ENGAGE_MISSED_SENSO
R 7E3h Servo Never saw sensor while engaging the Pivot Track
SRV_THR_PIVOT_TRACK_DISENGAGE_MISSED_SEN
SOR 7E4h Servo Never saw sensor while disengaging the Pivot Track
SRV_STEP_HEAD_BRUSH_PCC_UNKNOWN_COMMA
ND 7E5h Servo Unknown Head Brush Stepper command
SRV_STEP_PIVOT_TRACK_PCC_UNKNOWN_COMMA
ND 7E6h Servo Unknown Pivot Track stepper motor command
SRV_STEP_HEAD_POSITIONER_PCC_UNKNOWN_CO
MMAND 7E7h Servo Low level Head Positioner driver received an unknown
command.
SRV_HEAD_POSITIONER_MISSED_SENSOR 7E8h Servo Coarse Head Positioner sensor was not detected.
SRV_THR_HEAD_BRUSH_STUCK_ON_SENSOR 7E9h Servo Head Brush Cleaner could not get off of the Head Brush sensor.
SCSI_IONA_ER_UNKNOWN_ASPEN_STATE 7EAh SCSI Aspen_State variable contains unknown value.
IONA_RTOS_UNDEFINED_INSTR 7EBh General Iona RTOS undefined instruction exception interrupt
SCSI_IONA_ER_INVALID_RECEIVED_MESSAGE_COU
NT 7ECh SCSI Aspen_Process_Message got invalid message count
SCSI_IONA_ER_IMPROPER_EXIT_FROM_MESSAGE_
HANDLING 7EDh SCSI Aspen_Process_Message() message processing loop exited
prematurely
IONA_RTOS_PREFETCH_ABORT 7EEh General RTOS prefetch abort exception interrupt
IONA_RTOS_DATA_ABORT 7EFh General IONA RTOS data abort exception interrupt
IONA_RTOS_SOFTWARE_INTERRUPT 7F0h General RTOS Software Interrupt Exception
IONA_RTOS_RETURN_FROM_MAIN 7F1h General RTOS return from main error
IONA_RTOS_STACK_CHECK_HANDLER 7F2h General RTOS Stack Check Handler Exception Interrupt
IONA_RTOS_TRAP_HANDLER 7F3h General rt_trap exception handler interrupt
SCSI_PCMD_LOSTINFEHEAD_41 7F4h SCSI
SCSI_PCMD_LOSTINFEHEAD_42 7F5h SCSI
SRV_HEAD_STEPPER_NOT_WITHIN_RANGE 7F6h Servo Closed loop positioning of stepper is not within a specified
range.
SRV_SEQ_EXCEED_WRAP_RETRY 7F7h Servo
SCSI_STATUS_RESERVED 7F8h SCSI