Quantum LTO 4, User Manual

Page: 165 / 297

SCSI Commands: 35BREPORT DENSITY SUPPORT Page 157
Field Bytes Bits Description
Density Name 24-31 8 bytes of ASCII data. Can be one of the following:
For Ultrum 4
“U416 ”
For Ultrium 3:
“U316 ”
For Ultrium 2:
“U-28 ”
For Ultrium 1:
“U-18 ”
Description 32-51 20 bytes of ASCII data. Can be one of the following:
For Ultium 4
“Ultrium 4/16T “
For Ultrium 3:
“Ultrium 3/16T ”
For Ultrium 2:
“Ultrium 2/8T ”
For Ultrium 1:
“Ultrium 1/8T ”
Reserved All reserved bits are 0.
3.23.3 REPORT DENSITY SUPPORT Completion Status
Code Message Description
00h Good
Status
•
The drive is ready to perform any appropriate command.
•
The drive remains in any previously set mode.
•
The drive accepts commands from any Initiator.
•
The tape position is not changed.
02h Check
Condition Use the REQUEST SENSE command to retrieve status information. Possible
Sense Keys are:
Code Message Description
04h Hardware Error Parity error on the SCSI bus or drive hardware
failure.
05h Illegal Request The Command Descriptor Block is invalid.
06h Unit Attention The cartridge was changed, or the drive was
reset prior to this command.