SCSI Commands: 19BLOCATE
Page
43
3.7.2
LOCATE Completion Status
Code Message Description
00h
Good
Status
The tape is positioned to the logical block address specified.
The drive remains in any previously set mode.
The drive is ready to perform any appropriate command.
Note: If IMMED is one, then Good Status only indicates that the command is
valid.
02h
Check
Condition
Use the REQUEST SENSE command to retrieve status information. Possible
Sense Keys are:
Code Message
Description
02h
Not Ready
No cartridge is in the drive.
03h
Media Error
Unrecoverable data error encountered.
04h
Hardware Error
Parity error on SCSI bus or drive hardware
failure detected.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed, or the drive was
reset prior to this command.
08h
Blank Check
The drive encountered EOD.
Summary of Contents for LTO 4
Page 1: ......