Quantum LTO 4, User Manual

Page: 263 / 297

SRV_TIMEOUT_DURING_HEAD_STEPPER_MOVE_UN
TIL_REFERENCE_SENSOR_HIGH 4A8h Servo Timeout during head stepper move until reference sensor high.
SRV_TIMEOUT_DURING_HEAD_STEPPER_MOVE_UN
TIL_REFERENCE_SENSOR_LOW 4A9h Servo Timeout during head stepper move until reference sensor low.
SRV_TIMEOUT_DURING_HEAD_STEPPER_STOPPING
_AFTER_REFERENCE_SENSOR_HIGH 4AAh Servo Timeout during head stepper stopping after reference sensor
high.
SRV_TIMEOUT_DURING_HEAD_STEPPER_STOPPING
_AFTER_REFERENCE_SENSOR_LOW 4ABh Servo Timeout during head stepper stopping after reference sensor
low.
SRV_TIMEOUT_DURING_HEAD_STEPPER_SEARCHIN
G_FOR_SERVO_BAND 4ACh Servo Timeout during head stepper searching for servo bundle.
SRV_TIMEOUT_DURING_HEAD_STEPPER_RETURNIN
G_FROM_SEARCHING_FOR_SERVO_BAND 4ADh Servo Timeout during head stepper returning from searching for servo
bundle.
SRV_TIMEOUT_DURING_HEAD_STEPPER_SEARCHIN
G_FOR_SERVO_BAND_IN_OTHER_DIRECTION 4AEh Servo Timeout during head stepper searching for servo bundle in other
direction.
SRV_TIMEOUT_DURING_HEAD_STEPPER_RETURNIN
G_FROM_SEARCHING_FOR_SERVO_BAND_IN_OTHE
R_DIRECTION 4AFh Servo Timeout during head stepper returning from searching for servo
bundle in other d
SRV_TIMEOUT_DURING_HEAD_STEPPER_STOPPING
_AFTER_FAILING_SEARCH_FOR_SERVO_BAND 4B0h Servo Timeout during head stepper stopping after failing search for
servo bundle.
SRV_TIMEOUT_DURING_HEAD_STEPPER_STOPPING
_BEFORE_SEARCHING_FOR_SERVO_BAND_IN_OTH
ER_DIRECTION 4B1h Servo Timeout during head stepper stopping before searching for
servo bundle in other
SRV_TIMEOUT_DURING_HEAD_STEPPER_HYSTERE
SIS_BEFORE_SEARCHING_FOR_SERVO_BAND_IN_O
THER_DIRECTION 4B2h Servo Timeout during head stepper hysteresis before searching for
servo bundle in othe
SRV_TIMEOUT_DURING_HEAD_STEPPER_STOPPING
_AFTER_FAILING_SEARCH_FOR_SERVO_BAND_IN_
OTHER_DIRECTION 4B3h Servo Timeout during head stepper stopping after failing search for
servo bundle in ot
SRV_SEQ_INCORRECT_SERVO_BAND_BEFORE_TRA
CKING 4B4h Servo Servo band not at target servo band
SRV_SELF_EXCEPTION_BUF_OVERFLOW 4B5h Servo Overflow in self_isr has occured.
SRV_SEQ_SERVO_BAND_VALIDATION_FAILED_AND
_RECOVERED_ON_RETRY 4B6h Servo Exception: Servo band found does not match servo band
requested on first attempt
SRV_SEQ_HEAD_POSITION_REQUESTED_OUT_OF_
RANGE 4B7h Servo Servo head position out of range in servo band validation
SRV_SEQ_SERVO_BAND_VALIDATION_FAILED_CAN
NOT_COMPUTE_SERVO_BAND_NUMBER 4B8h Servo Servo code could not compute the servo band number
SRV_SELF_FIQ_SERVO_ERROR_DATA 4B9h Servo FIQ Servo code generated error with data
SRV_POWER_ON_SELF_TEST_FAILED 4BAh Servo Power on self test failed during power up
SRV_INVALID_ERROR_ALERT_TRANSLATION_TO_M
ESSAGE_STATUS_TYPE 4BBh Servo Alert type is invalid for translation to error code
(MESSAGE_STATUS_T).
SRV_SMACHINE_RADIUS_CALCULATION_RETRIED_
SUCCESSFULLY 4BCh Servo Radius calculation failed to validate on first attempt but
succeeded on retry
SRV_SEQ_HEAD_OFFSET_CALIBRATION_REJECTED
_TAPE_NOT_MOVING 4BDh Servo Head offset calibration command cannot be issued if tape is not
moving.
SRV_MOVETAPE_LP6_OVERRUN 4BEh Servo LP6 overrun detected by RTOS
SRV_MOVETAPE_LP1_UNDERRUN 4BFh Servo LP1 underrun detected by RTOS
SRV_MOVETAPE_EOT_OVERRUN 4C0h Servo EOT overrun detected by encoder interrupt
SRV_MOVETAPE_BOT_UNDERRUN 4C1h Servo BOT underrun detected by encoder interrupt
SRV_CMDPROC_INVALID_DRIVE_STATE_ON_RAMP_
CMD 4C2h Servo Ramp cannot execute at current drive state
SRV_CMDPROC_OUT_OF_RANGE_DRIVE_STATE_ON
_RAMP_CMD 4C3h Servo Ramp cannot execute at undefined drive state
SRV_ATTEMPTING_TO_FIND_PES_RETRY 4C4h Servo Head stepper module is going to look for pes after a delay.
SRV_SEQ_TARGET_LPOS_NOT_BEHIND_CURRENT_
POSITION 4C5h Servo Reject reposition command
SRV_SEQ_TARGET_LPOS_EXCEEDED_IN_REPOSITI
ON_COMMAND 4C6h Servo Command failed LPOS target past notification point.
SRV_CART_MEMORY_LP1_AND_WP_CALC_LP1_NO
T_WITHIN_TOLERANCE 4C7h Servo Cartridge memory LP1 value isn't within tolerance of the
Whirlpool calculated LP
SRV_CM_CALC_CART_TYPE_DOES_NOT_MATCH_R 4C8h Servo Cartridge type derived from mic LP1 and LP6 doesn't match