![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212297.webp)
SRV_PIN_GRABBER_INIT_NO_C1 0A22h
Servo
Cannot
move
pin grabber from zone A to zone C1 during
initialization
SRV_PG_HALL_CAL_OUT_OF_LIMIT 0A23h
Servo
At
least
one hall sensor calibration parameter is out of limit
SRV_LOAD_UNLOAD_STUCK 0A24h
Servo
Errors
encountered at both load and unload direction, tray is
stuck in the middl
SRV_THREAD_UNTHREAD_STUCK 0A25h
Servo
Errors
encountered at both thread and unthread direction, it's
stuck in the midd
SRV_UNTHREAD_CANNOT_REACH_PIN_CHECK 0A26h
Servo
During unthread, pin grabber cannot reach standby for pin
check.
FC_INTERFACE_CTIO_DMAHWERR 0A27h
SCSI
RB
Host
DMA slippage occurred during DMA transfer.
FC_INTERFACE_CTIO_DMAHWERRAUTOGOOD
0A28h
SCSI
RB Host DMA slippage occurred during DMA transfer and auto
GOOD response was alr
SRV_COMMAND_REJECTED_NO_TRACKING_MODE 0A29h Servo
Need tracking for this command
Summary of Contents for LTO 4
Page 1: ......