SCSI Commands: 27BPREVENT ALLOW MEDIUM REMOVAL
Page
121
3.15.2
PREVENT ALLOW MEDIUM REMOVAL Completion Status
Code Message
Description
00h Good
Status
•
The drive is ready to perform any appropriate command.
•
The drive remains in any previously set mode.
•
The tape position is not changed.
02h Check
Condition
Use the REQUEST SENSE command to retrieve status information.
Possible Sense Keys are:
Code Message
Description
04h
Hardware Error
Parity error on the SCSI bus or drive
hardware failure.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed, or the drive
was reset prior to this command.
Summary of Contents for LTO 4
Page 1: ......