SCSI Commands: 18BLOAD UNLOAD
Page
40
3.6.1.2
Medium Loadable Position
Hold
Reten Load Description
0
0
0
No action taken, Good Status is returned.
0 0 1
Load the medium to the Loaded position. The medium will be ready at
BOM.
0
1
0
Check condition, sense data 02/3A/03.
0 1 1
Load the medium to the Loaded position and perform the retension
operation. The medium will be ready at BOM.
1
0
0
Load the medium to the Medium Auxiliary Memory Accessible position.
1
0
1
Load the medium to the Medium Auxiliary Memory Accessible position.
1
1
0
Check condition, sense data 02/3A/03.
1
1
1
Check condition, sense data 02/3A/03.
3.6.1.3
Medium Auxiliary Memory Accessible Position
Hold
Reten Load Description
0
0
0
Unload the medium to the Loadable position.
0 0 1
Load the medium to the Loaded position. The medium will be ready at
BOM.
0
1
0
Check condition, sense data 02/3A/04.
0 1 1
Load the medium to the Loaded position and perform the retension
operation. The medium will be ready at BOM.
1
0
0
No action taken, Good Status is returned.
1
0
1
No action taken, Good Status is returned.
1
1
0
Check condition, sense data 02/3A/04.
1
1
1
Check condition, sense data 02/3A/04.
3.6.1.4
Medium Loaded And Ready Position
Hold
Reten Load Description
0
0
0
Unload the medium to the Loadable position.
0 0 1
Rewind the medium to the Loaded position. The medium will be ready
at BOM.
0 1 0
Perform the retension operation and unload the medium to the
Loadable position.
0 1 1
Perform the retension operation. The medium will remain at the Loaded
position ready at BOM.
1 0 0
Unload the medium to the Medium Auxiliary Memory Accessible
position.
1 0 1
Unload the medium to the Medium Auxiliary Memory Accessible
position.
1 1 0
Perform the retension operation and unload the medium to the Medium
Auxiliary Memory Accessible position.
1 1 1
Perform the retension operation and unload the medium to the Medium
Auxiliary Memory Accessible position.
If the Prevent Medium Removal state has been set using the PREVENT ALLOW
MEDIUM REMOVAL command and a LOAD UNLOAD command is issued that
requests the medium be unloaded to the Medium Loadable position, then a check
condition status will be returned. The sense key will be set to Illegal Request (05)
and the additional sense data will be set to Medium Removal Prevented (5302).
Summary of Contents for LTO 4
Page 1: ......