![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212226.webp)
SCSI Commands: 51BWRITE
Page
218
is encountered. Any WRITE command issued within Early Warning and successfully
completed finishes with a Check Condition and the EOM bit set.
3.39.2
WRITE Completion Status
Code Message
Description
00h
Good
Status
•
The SCSI data has been transferred to the data buffer.
•
The drive remains in any previously set mode.
02h
Check
Condition
Use the REQUEST SENSE command to retrieve status information. Possible
Sense Keys are:
Code Message
Description
02h
Not Ready
No cartridge is in the drive.
03h
Media Error
Unrecoverable data error encountered.
04h
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
05h
Illegal Request
The Command Descriptor Block is invalid.
06h
Unit Attention
The cartridge was changed, or the drive was reset
prior to this command.
07h
Write Protect
The tape is write-protected; check the cartridge
before continuing.
0Dh
Volume Overflow
The WRITE command completed with data in the
buffer because the end-of-partition was
encountered.
Summary of Contents for LTO 4
Page 1: ......