![background image](http://html1.mh-extra.com/html/quantum/lto-4/lto-4_user-manual_3834212260.webp)
ECT_DURING_FINDZERO
SRV_FINDZERO_NULL_FUNCTION_IN_TABLE 449h
Servo
null function pointer in table lookup
SRV_FINDZERO_INVALID_MESSAGE_RECEIVED 44Ah Servo invalid
message received by reel task during findzero operation
SRV_CMDPROC_INVALID_DRIVE_STATE_ON_UNLOA
D_CMD
44Bh
Servo
invalid drive state on unload command
SRV_CMDPROC_OUT_OF_RANGE_DRIVE_STATE_ON
_UNLOAD_CMD
44Ch
Servo
Drive state is out of range.
SRV_CMDPROC_INVALID_DRIVE_STATE_ON_EJECT
_CMD
44Dh Servo Eject
command
rejected
SRV_CMDPROC_OUT_OF_RANGE_DRIVE_STATE_ON
_EJECT_CMD
44Eh Servo Eject
command
rejected
SRV_FINDZERO_MOVETAPE_API_BUSY_REJECT
44Fh
Servo
Servo API function MoveTape() returned busy status when
called from findzero
SRV_FINDZERO_POSITIONTAPE_API_FWD_BUSY_RE
JECT
450h
Servo
API call PositionTape forward failed when called from findzero
SRV_FINDZERO_POSITIONTAPE_API_REV_BUSY_RE
JECT
451h
Servo
API call PositionTape reverse failed when called from findzero
SRV_CMDPROC_CMD_REJECTED_DURING_INITIALIZ
ATION
452h
Servo
Mechanical command received from scrambler while still
initializing
SRV_CMDPROC_INVALID_DRIVE_STATE_ON_PARK_
CMD
453h
Servo
Park command rejected
SRV_CMDPROC_OUT_OF_RANGE_DRIVE_STATE_ON
_PARK_CMD
454h
Servo
Park command rejected
SRV_CMDPROC_INVALID_DRIVE_STATE_ON_UNPAR
K_CMD
455h
Servo
Unpark command rejected
SRV_CMDPROC_OUT_OF_RANGE_DRIVE_STATE_ON
_UNPARK_CMD
456h
Servo
Unpark command rejected
SRV_CMDPROC_TAPE_IS_NOT_STOPPED
457h
Servo
Command rejected because tape is moving.
SRV_CMDPROC_INVALID_COMMAND_CHANGE_OF_
DIRECTION
458h
Servo
Command rejected because tape is moving in the opposite
direction
SRV_CAL_MOT1_MOVE
459h
Servo
Motor 1 (drive motor) moved during motor bias calibration
SRV_CAL_MOT2_MOVE
45Ah
Servo
Motor 2 (cartridge motor) moved during motor bias calibration
SRV_CAL_MOT1_STOP
45Bh
Servo
Motor 1 (drive motor) failed to move during motor bias
calibration
SRV_CAL_MOT2_STOP
45Ch
Servo
Motor 2 (cartridge motor) failed to move during motor bias
calibration
SRV_SEQ_RAMP_DOWN_COMPLETED_BEFORE_HE
AD_STEPPER_MOVE
45Dh
Servo
Ramp down completed before head stepper movement
completed. Potential tape damag
SRV_MOVETAPE_LPOS_NOTICATION_PASSED 45Eh
Servo LPOS notification exceeded at set up time.
SRV_SEQ_INVALID_TRACKING_MODE_IN_REPOSITI
ON_TO_WRAP_COMMAND
45Fh
Servo
Invalid tracking mode parameter during reposition to wrap
command
SRV_UNKNOWN_CMD 460h
Servo
Unknown
command
(out of range) in command processor
SRV_TESTBIT_INVALID_MODE_FOR_SET_MODE
461h
Servo
Invalid mode for test bit usage.
SRV_CLOSED_LOOP_STEPPER_FAILED_TO_FIND_P
ES
462h
Servo
Failed to find PES during closed loop head stepper positioning
SRV_STATEM_INVALID_STATE_AFTER_STEPPER_R
ECOVERY
463h
Servo
Invalid drive state after stepper recovery operation
SRV_HIT_EOT_YELLOW
464h
Servo
Servo entered yellow EOT zone in fwd direction
SRV_HIT_EOT_RED
465h
Servo
Servo entered red EOT zone in fw direction
SRV_SEQ_REGISTER_RESPONSE_OVERFLOW
466h
Servo
Too many responses were registered in the sequencer.
SRV_PES_AVG_FUNCTION_ACTIVE 467h
Servo
Read
PES Average function already in progress
SRV_PES_AVG_READ_COUNT_TOO_LARGE 468h
Servo
Read
count for PES Average function too large for buffer
SRV_SZA_SC_DATA_BUFFER_IN_USE 469h
Servo
SZA
read
command rejected because servo controller data
buffer is in use.
SRV_PESAVG_SC_DATA_BUFFER_IN_USE 46Ah
Servo
PESAVG
command rejected because servo controller data buffer
is in use.
SRV_MOVETAPE_RAMP_UP_FAILED_REQUESTED_S
PEED_NOT_ACQUIRED
46Bh
Servo
Ramp up did not get to requested speed
SRV_MOVETAPE_SPEED_OUT_OF_RANGE_IN_GET_
CURRENT_SPEED
46Ch
Servo
Tape speed returned from get current speed out of range
Summary of Contents for LTO 4
Page 1: ......