DSM_WRITE_FLUSH_ERROR 7Ah
Data
set
manager
DSM_WRITE_ERROR 7Bh
Data
set
manager
DSM_NULL_DS_DETECTED_DURING_FLUSH 7Ch
Data
set
manager
DSM_CANT_FLUSH_COMPRESSOR_NOT_HALTED 7Dh Data
set
manager
DSM_NOT_IN_WRITE_MODE_CANT_FLUSH 7Eh
Data
set
manager
DSM_BE_PENDED_FLUSH_CMD_LOST 7Fh
Data
set
manager
DSM_ELDC_SET_NDSPTR_NULL 80h
Data
set
manager
DSM_LOCATE_NEEDS_IDLE 81h
Data
set
manager
DSM_GENERAL_COMPRESSION_ERROR 82h
Data
set
manager
DSM_POSITION_MISMATCH_AFTER_FLUSH 83h
Data
set
manager
DSM_MISSING_DS_RETURN_TO_FREEPOOL 84h
Data
set
manager
DSM_ELDC_DS_COUNT_MISMATCH 85h
Data
set
manager
DSM_ELDC_DS_COUNT_IS_NEGATIVE 86h
Data
set
manager
DSM_MISSING_DS_FLUSH_DONE 87h
Data
set
manager
DSM_SPACE_REV_FMKS_BOT_ENCOUNTERED 88h Data
set
manager
DSM_CMPR_SET_MAXSIZE_BUSY 89h
Data
set
manager
TAPE_ILLEGAL_CMD 8Ah
Tape
TAPE_SRV_ILLEGAL_CMD
8Bh
Tape
Illegal cmd opt code
TAPE_SRV_CMD_TIMEOUT
8Ch
Tape
WP idle but not pick up cmd until time-out
TAPE_SRV_OVERLAPPED_CMD 8Dh
Tape
Low
level is currently busy with another cmd
TAPE_SRV_WP_BUSY
8Eh
Tape
unable deposit cmd since WP busy until time-out
TAPE_RECYCLE
8Fh
Tape
Data Set status: recycle Data Set.
TAPE_DS_NOT_WRITTEN
90h Tape Data
Set status: not written Data Set.
TAPE_NOT_READY
91h
Tape
Whirlpool_status Ready bit is not set.
TAPE_WRITE_PROTECT
92h
Tape
Write: Write protect tape.
TAPE_ILLEGAL_MODE
93h
Tape
Command received in illegal mode.
TAPE_EOT_STATUS
94h
Tape
Write: End of tape detected.
TAPE_WRITE_HARD_ERR
95h
Tape
Write: Hard write error detected.
TAPE_INVALID_STATE
96h Tape Invalid
state.
TAPE_WRITE_UNEXP_MSG
97h Tape Write: unexpected message received.
TAPE_WRITE_DS_MISMATCH
98h
Tape
Write: data set ptr not match
TAPE_SERVO_REC_FAIL
99h Tape Write:
fail to recover from servo demark.
TAPE_APPEND_FAIL 9Ah
Tape
Write: fail to append because can not
TAPE_C1_ERR
9Bh
Tape
Write: C1 ECC error detected by formatter.
TAPE_WRITE_UNKNOWN_ERR 9Ch
Tape
Write:
Unknown
error.
TAPE_HARD_READ_ERROR 9Dh
Tape
Read: Hard Read Error.
TAPE_READ_EOT
9Eh
Tape
Read: End of Tape
TAPE_READ_AT_EOD
9Fh
Tape
Read: EOD encounter
TAPE_READ_FIFO_OVRRUN A0h
Tape
Read: FIFO Overrun ( HW error)
TAPE_TARGET_NOT_FOUND
A1h
Tape
Seek: target not found error
TAPE_ILLEGAL_SRV_ALERT
A2h
Tape
Task: illegal SERVO_ALERT message received.
TAPE_ILLEGAL_MSG_TYPE
A3h
Tape
Task: illegal message type received.
TAPE_BUSY_STATUS A4h
Tape
Task:
Busy.
TAPE_ILLEGAL_ABORT_CMD A5h
Tape
Task: illegal ABORT_COMMMAND received.
Summary of Contents for LTO 4
Page 1: ......