QNAP TS-1079 Pro, Software User Manual

Page: 97 / 321

97
If the Wi-Fi connection is the only connection between the NAS and the router/AP, you
must select "WLAN1" as the default gateway in "Network" > "TCP/IP" page. Otherwise,
the NAS will not be able to connect to the Internet or communicate with another
network.
Note :
The WEP key must be exactly 5 or 13 ASCII characters; or exactly 10 or 26
hexadecimal characters (0-9 and A-F).
If you have trouble connecting to an encrypted wireless network, check the
wireless router/AP settings and change the transfer rate from "N-only" mode to "B/
G/N mixed" or similar settings.
Users of Windows 7 with WPA2 encryption cannot establish ad-hoc connection
with the NAS. Please change to use WEP encryption on Windows 7.
A fixed IP address is required for the wireless interface in order to establish an ad-
hoc connection.
IP v6
The NAS supports IPv6 connectivity with "stateless" address configurations and RADVD
(Router Advertisement Daemon) for IPv6, RFC 2461 to allow the hosts on the same
subnet to acquire IPv6 addresses from the NAS automatically. The NAS services which
support IPv6 include:
Remote replication
Web Server
FTP
iSCSI (Virtual disk drives)
SSH (putty)
To use this function, select the option "Enable IPv6" and click "Apply". The NAS will
restart. After the system restarts, login the IPv6 page again. The settings of the IPv6
interface will be shown. Click the "Edit" button to edit the settings:
IPv 6 Auto C onfigura tion: If an IPv6 enabled router is available on the network,
select this option to allow the NAS to acquire the IPv6 address and the
configurations automatically.
Us e s ta tic IP a ddre s s : To use a static IP address, enter the IP address (e.g.
2001:bc95:1234:5678), prefix length (e.g. 64), and the gateway address for the