QNAP TS-1079 Pro, Software User Manual

Page: 177 / 321

177
option it will disable the function, so no users can use it including the administrator, but
the action will not delete the existing versions that have been created. "Enable version
for my Qsync folder" allows each user to apply the function for their own files.
Ta rge t folde r for v e rs ion c ontrol
You can apply the version control to the files under specific Qsync folders to save
space. To assign specific folders, select "Assign specific subfolder under the Qsync
folder", then click "Add" to add folders. You can add 5 folders at most. Click "Delete" to
remove all versions under the selected folders and subfolders. This will not take effect
until you click "Apply" or "Apply All".
Adv a nc e d
Maximum Number of Versions: You can choose how many versions you want to keep for
your files. This is a control only for administrators. The more versions you keep the
more storage space it will take up. To know how much space has been used for version
control, click the "Check" button in the section of "Disk Used for Version Control".
Note :
If you reduce the maximum number of versions, it will impact the versions that
have been created and if the volume of versions exceeds the new settings, the
earlier versions will be dropped. Only the equivalent number of latest versions as
of the new settings will be kept.
The deletion will not take effect immediately until you click "Apply" or "Apply All".
M a na ging or M onitoring Q sync Sta tus via W e b Brow se r
Login the NAS via a web browser and click the Qsync button.
1. Overview: Provide links to install the utility and to File Station and list the total
number of online users and devices. You can also choose to enable or disable the
Qsync service (for administrators only.)
2. Users: List information of online users, and you can manage the Qsync service for
users (for administrators only.)
3. Devices: List the status of connected devices and you can choose to allow or
terminate connection of the devices.
i. If users login from their PC, the name of the device will be shown as their
computer name.
ii. If users login from Qfile, the name of the device will be shown as "Qfile-Android"