QNAP TS-1079 Pro Software User Manual Download Page 19

Page: 19 / 321

Pro, TS-870 Pro, TS-870U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1270U-RP,

TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.

**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support

eSATA port.

Ala rm Buz z e r

The alarm buzzer can be disabled in "Control Panel" > "System Settings" > "Hardware" > "

Buzzer".

B e e p s ound

No. of

Tim e s

De s c ription

Short beep

(0.5 sec)

1) The NAS is starting up.

2) The NAS is being shut down (software shutdown).

3) The user presses the reset button to reset the

NAS.

4) The system firmware has been updated.

Short beep

(0.5 sec)

The NAS data cannot be copied to the external

storage device from the front USB port.

Short beep

(0.5 sec),

long beep

(1.5 sec)

3, every 5

min

The system fan is out of function (TS-119 does not

support smart fan).

Long beep

(1.5 sec)

1) The disk volume is going to be full.

2) The disk volume has reached its full capacity.

3) The hard disk drives on the NAS are in degraded

mode.

4) The user starts hard drive rebuilding.

1) The NAS is turned off by force shutdown

(hardware shutdown).

2) The NAS has been turned on and is ready.

Summary of Contents for TS-1079 Pro


































































































































































































































































































































Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands

QNAP TS-1079 Pro, Software User Manual

Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands