QNAP TS-1079 Pro, Software User Manual

Page: 102 / 321

102
4.5 Hardware
Go to "Control Panel" > "System Settings" > "Hardware" to configure the hardware
functions of the NAS.
G e ne ra l
E na ble c onfigura tion re s e t s witc h: When this function is turned on, you can
press the reset button for 3 seconds to reset the administrator password and the
system settings to default (the disk data will be retained), or 10 seconds for
advanced system reset.
B a s ic s y s te m re s e t (3 s e c ): After pressing the reset button for 3 seconds, a beep
sound will be heard. The following settings will be reset to default:
o
System administration password: admin.
o
TCP/IP configuration: Obtain IP address settings automatically via DHCP.
o
TCP/IP configuration: Disable Jumbo Frame.
o
TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port
trunking mode will be reset to "Active Backup (Failover)".
o
System port: 8080 (system service port).
o
Security level: Low (Allow all connections).
o
LCD panel password: (blank); This feature is only provided by the NAS models
with LCD panels. Please visit http://www.qnap.com for details.
o
VLAN will be disabled.
o
Service binding: All NAS services run on all available network interfaces.