QNAP TS-1079 Pro Software User Manual Download Page 152

Page: 152 / 321

152

5.5.2 Connecting NAS to an LDAP Directory

LDAP stands for Lightweight Directory Access Protocol. It is a directory that can store

the information of all the users and groups in a centralized server. Using LDAP, the

administrator can manage the users in the LDAP directory and allow the users to

connect to multiple NAS servers with the same username and password. This feature is

intended for administrator and users who have some knowledge about Linux servers,

LDAP servers, and Samba. An LDAP server which is up and running is required when

using the LDAP feature of the QNAP NAS.

R e quire me nts

Required information/settings:

The LDAP server connection and authentication information

The LDAP structure, where the users and groups are stored

The LDAP server security settings

C onne cting Q NAP T urbo NAS to LDAP Dire ctory

Follow the steps below to connect the QNAP NAS to an LDAP directory:

1. Login the web interface of the NAS as an administrator.

2. Go to "Privilege Settings" > "Domain Security". By default, the option "No domain

security" is enabled. That means only the local NAS users can connect to the NAS.

3. Select "LDAP authentication" and complete the settings.

LDAP Server Host: The host name or IP address of the LDAP server.

LDAP Security: Specify how the NAS will communicate with the LDAP server:

ldap:// = Use a standard LDAP connection (default port: 389).

ldap:// (ldap + SSL) = Use an encrypted connection with SSL (default port:

686). This is usually used by older version of LDAP servers.

Ldap:// (ldap + TLS) = Use an encrypted connection with TLS (default port:

389). This is usually used by newer version of LDAP servers

BASE DN: The LDAP domain. For example: dc=mydomain,dc=local

Root DN: The LDAP root user. For example cn=admin, dc=mydomain,dc=local

Password: The root user password.

Users Base DN: The organization unit (OU) in which users are stored. For

example: ou=people,dc=mydomain,dc=local

Groups Base DN: The organization unit (OU) in which groups are stored. For

example ou=group,dc=mydomain,dc=local

Summary of Contents for TS-1079 Pro


































































































































































































































































































































Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands

QNAP TS-1079 Pro, Software User Manual

Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands