QNAP TS-1079 Pro Software User Manual Download Page 17

Page: 17 / 321

2.1.2 Checking System Status

LED Displa y & Syste m Sta tus O ve rvie w

LE D

C olor

LE D Sta tus

De s c ription

System

Status

Red/

Green

Flashes green and

red alternately

every 0.5 sec

1) The hard disk drive on the NAS is being

formatted.

2) The NAS is being initialized.

3) The system firmware is being updated.

4) RAID rebuilding is in process.

5) Online RAID capacity expansion is in

process.

6) Online RAID level migration is in process.

Red

1) The hard disk drive is invalid.

2) The disk volume has reached its full

capacity.

3) The disk volume is going to be full.

4) The system fan is out of function (TS-

119 does not support smart fan).

5) An error occurs when accessing (read/

write) the disk data.

6) A bad sector is detected on the hard disk

drive.

7) The NAS is in degraded read-only mode

(2 member hard drives fail in a RAID 5 or

RAID 6 configuration, the disk data can

still be read).

8) (Hardware self-test error).

Flashes red every

0.5 sec

The NAS is in degraded mode (one member

hard drive fails in RAID 1, RAID 5 or RAID 6

configuration).

Flashes green

every 0.5 sec

1) The NAS is starting up.

2) The NAS is not configured.

3) The hard disk drive is not formatted.

Green

The NAS is ready.

Summary of Contents for TS-1079 Pro


































































































































































































































































































































Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands

QNAP TS-1079 Pro, Software User Manual

Search results

Summary of Contents for TS-1079 Pro

Reviews:

Related manuals for TS-1079 Pro

Brands by name

Popular brands