QNAP TS-1079 Pro, Software User Manual

Page: 160 / 321

160
To connect to the NAS from Linux, enable NFS service. To configure the NFS access
right to the shared folders on the NAS, go to "Privilege Settings" > "Share Folders".
Click the Access Permission button on the "Action" column.Select NFS host access from
the drop-down menu on top of the page and specify the access right. If you select "No
limit" or "Read only", you can specify the IP address or domains that are allowed to
connect to the folder by NFS.
No limit: Allow users to create, read, write, and delete files or folders in the shared
folder and any subdirectories.
Read only: Allow users to read files in the shared folder and any subdirectories but
they are not allowed to write, create, or delete any files.
Deny access: Deny all access to the shared folder.
Connecting to the NAS by NFS
On Linux, run the following command:
m ount - t nfs <NAS IP>:/<Sha re d F olde r Na m e > <Dire c tory to M ount>
For example, if the IP address of your NAS is 192.168.0.1 and you want to link the
shared folder "public" under the /mnt/pub directory, use the following command:
m ount - t nfs 192.168.0.1:/public /m nt/pub
Note : You must login as the "root" user to initiate the above command.
Login as the user ID you define, you can use the mounted directory to connect to your
shared files.