C-17
Certification
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames E & F
CE Marking for Low Voltage Directive
When installed in accordance with this manual, the 890 product is CE marked by Parker SSD Drives in
accordance with the low voltage directive (S.I. No. 3260 implements this LVD directive into UK law).
Refer to page C-18 for the "EC Declaration of Conformity" (low voltage directive).
Legal Requirements for CE Marking
IMPORTANT:
Before installation, clearly understand who is responsible for conformance with the EMC directive.
Misappropriation of the CE mark is a criminal offence.
It is important that you have now defined who is responsible for conforming to the EMC directive, either:
Parker SSD Drives Responsibility
You intend to use the unit as
relevant apparatus.
When the specified EMC filter is correctly fitted to the unit following EMC installation instructions, it
complies with the relevant standards indicated in the table on page C-12 EMC Compliance.
The relevant declarations are to be found at the end of this chapter. The CE mark is displayed on the EC
Declaration of Conformity (EMC Directive) provided at the end of this chapter.
Customer Responsibility
You intend to use the unit as a
component,
therefore you have a choice:
1.
To fit the specified filter following EMC installation instructions, which may help you gain EMC
compliance for the final machine/system.
2.
Not to fit the specified filter, but use a combination of global or local filtering and screening methods,
natural migration through distance, or the use of distributed parasitic elements of the existing
installation.