Paradyne JetFusion 2208, User Manual

Page: 23 / 247

Q u i c k S t a r t G u i d e 2-1
C
H A P T E R
C
HAPTER
2
Q
UICK
S
TART
G
UIDE
This chapter describes the steps to install, connect, and set the IP address of
the IAD. It introduces the menu interface and describes how to perform basic
configuration for common LAN and WAN environments. It also describes
basic operations such as resetting the IAD and logging off.
In many cases, all the information you need to get an IAD up and running is
included in this single chapter. In most installations, you will proceed through
these topics in order. If your situation varies, you will find more detailed
information on installation, connection, configuration, and troubleshooting in
the chapters that follow this Quick Start Guide.
Unpacking the IAD
Each IAD is packed and shipped in a durable container. Unpack and carefully
remove the IAD from the package and packing material.
IAD Package
Components
Each IAD is shipped with the components listed below. As you unpack them,
note their condition and identity and compare the list with the packing list in
the package.
•
AC power adapter and cord (6 feet long), or AC power cord
•
Ethernet cable (straight through), 7 feet long
•
WAN cable, 7 feet long
If you note any visible damage or missing components, notify the shipping
company immediately to make a damage claim. Contact the company from
which the IAD was purchased to obtain a Return Material Authorization
(RMA) for return of damaged equipment or to order missing components.
NOTICE:
It is suggested that you keep the shipping container and packing
material for future storage or shipping of the unit.