Paradyne JetFusion 2208, User Manual

Page: 73 / 247

C o n f i g u r a t i o n 4-17
1
Type
“P”
on the T1/E1 Configuration menu (Figure 4.9) to display the
physical layer statistics and the alarm log.
Figure 4.21 Sample Physical Layer Stats and Alarm Log:
2
Enter any key to continue paging through the report; press Escape to cancel
and return to the T1/E1 Configuration menu.
Clear Physical Layer
Stats
Type
“Z”
on the T1/E1 Configuration menu (Figure 4.9) to clear all Physical
Layer statistics.
Configure Datalink Protocol
If you are setting up voice and data channels, you can select ATM or Frame
Relay as you set up the channels as described below.
To select ATM or Frame Relay as the datalink protocol, on the WAN
Configuration menu, type
“1”
. The IAD displays the WAN Datalink Protocol
Configuration menu (Figure 4.22), identifying the current datalink protocol
just below the banner.