Paradyne JetFusion 2208, User Manual

Page: 178 / 247

5-24 2 0 0 0 - A 2 - G B 2 1 - 1 0
Display ATM Statistics This report displays basic ATM transport statistics at the cell level for all
ports and PVCs.
LMI frames Rx No. of LMI (Local Management Interface) frames
received
ANSI frames Rx No. of ANSI frames received
Transmitted Data
Tx Frames No. of frames transmitted
Tx Bytes No. of total bytes transmitted
Tx Frames discarded No. of Frame Relay packets discarded due to:
- Transmitted frames are larger than PDU size.
- Packets overflow.
DE set on Tx Indicates Discard Eligibility is allowed on transmitted
frames, based on congestion, to maintain committed
information rate.
FECN set on Tx Forward Explicit Congestion Notification status set to
notify DTE that congestion avoidance should be
initiated by IAD.
BECN set on Tx Backward Explicit Congestion Notification status set
to notify DTE that congestion avoidance should be
initiated by the sending device.
Tx congestion counter No. of frames dropped due to congestion to maintain
committed information rate.
CLLM frames Tx No. of CLLM frames received
LMI frames Tx No. of LMI frames received
ANSI frames Tx No. of ANSI frames received
Last error: Description of last recorded error since reset.
Parameter Description
Field Description
The link has been up for X
hours X minutes X seconds Total time for the current time has been established.
Cells Rx No. of valid ATM cells received.
CLPI Rx No. of cells received with CLPI (Cell Loss Priority
Indication) bit is on.
OAM Rx No. of OAM (Operation And Maintenance) cells
received.
EFCI Rx No. of cells received with EFCI (Explicit Forward
Congestion Indication) bit is on.
RM Rx No. of RM (Resource Management) cells received.