Paradyne JetFusion 2208, User Manual

Page: 62 / 247

4-6 2 0 0 0 - A 2 - G B 2 1 - 1 0
Figure 4.5 SDSL Configuration Menu
NOTICE:
The options you see on the SDSL Configuration menu depend on the
specific DSLAM.
Toggle SDSL Mode
(CPE or CO)
To select CPE or CO Mode, follow the steps below.
1
Type
“1”
on the SDSL Configuration menu (Figure 4.5). The IAD displays
the current SDSL Mode and prompts you to change it.
2
Type
“1”
to select CO, or type
“2”
to select CPE. The IAD sets the mode
and redisplays the SDSL Configuration menu.
NOTICE:
The CO Mode is reserved for testing. CPE is the normal mode.
Set SDSL Speed to
Auto Cycle (Nokia)
To select Auto Cycle - Nokia DSLAM, type
“2”
on the SDSL Configuration
menu to set the SDSL speed to Auto Cycle for connecting to a Nokia
DSLAM.
The IAD saves the configuration and redisplays the SDSL Configuration
menu.
Set SDSL Speed to
Auto Sense (Copper
Mountain)
To select Auto Sense
−
Copper Mountain DSLAM, type
“3”
on the SDSL
Configuration menu (Figure 4.5) to set the SDSL speed to Auto Sense for
connecting to a Copper Mountain DSLAM. The IAD saves the configuration
and redisplays the SDSL Configuration menu.
Enable/Disable
Conexant Autobaud
Mode
1
Type
“4”
on the SDSL Configuration menu (Figure 4.5) to enable or
disable Conexant Autobaud mode. The IAD displays the current setting and
prompts you to change it.
2
Type
“E”
to enable or
“D”
to disable Autobaud mode. The IAD saves the
configuration and redisplays the SDSL Configuration menu.