Paradyne JetFusion 2208, User Manual

Page: 151 / 247

C o n f i g u r a t i o n 4-95
Display NAT Connection Table
When NAT is enabled, you can display the current open connections. To
display the connection table, type
“C”
on the NAT Configuration menu. The
IAD displays the NAT connection table.
The IAD will advise you if there are no open connections. Press any key to
return to the NAT Configuration menu.
Display NAT Connection Details
When NAT is enabled, you can display details about a specific connection.
1
To display the connection details, type
“D”
on the NAT Configuration
menu and enter the public IP address. The IAD prompts you for the outside
port number of the connection.
2
Type the outside port number and press Enter. The IAD displays the NAT
connection details. The IAD will advise you if there are no connections
open.
3
Press any key to return to the NAT Configuration menu.
Report Entry Description
TCP/UDP/ICMP, etc. IP address:Port—IP address plus port number of the
foreign device; zero if ICMP protocol.
IP address:Port:—IP address plus port number of the
local (LAN) device; zero if ICMP protocol. These two
values are separated by the symbol <->
out_port Port number assigned by NAT which is translated by
NAT to/from the local port.
pkts Out: packets sent from the local device to the foreign
device. In: packets sent from the foreign device to the
local device.
state TCP state number (TCP only)
idle Idle time in seconds for the connection
Report Entry Description
Foreign IP IP address of the foreign device
Local IP IP address of the local (LAN) device
Outside port Port number assigned by NAT which is translated by
NAT to/from the local port.
Inside port Port number of the local (LAN) device; zero if ICMP
protocol
Foreign port Port number of the foreign device; zero if ICMP
protocol
Outgoing packets/# bytes Packets sent from the local device to the foreign device.
Incoming packets/# bytes packets sent from the foreign device to the local device.