Paradyne JetFusion 2208, User Manual

Page: 67 / 247

C o n f i g u r a t i o n 4-11
Figure 4.11 Select Line Build Out Menu
2
Type the option to select the line build out that corresponds to the T1 span
length in use. The IAD resets the interface and redisplays the Select Line
Build Out menu.
3
Press Escape to return to the T1 Configuration menu and continue with
other configuration tasks.
Select B8ZS or AMI To select B8ZS or AMI, follow the steps below.
1
To set zero suppression, type
“4”
on the T1 Configuration menu (Figure
4.9) to select B8ZS or AMI. The IAD displays the current setting and
prompts you to change it.
2
Type
“Y”
to change the setting.
3
Press Escape to return to the T1 Configuration menu and continue with
other configuration tasks.
Configure Loopback To configure loopback, follow the steps below.
1
Type
“5”
on the T1 Configuration menu (Figure 4.9) to configure
loopback. The IAD displays the current setting for each type of loopback
and ESP loopback commands, and the Loopback Configuration menu
(Figure 4.12).