Paradyne JetFusion 2208, User Manual

Page: 137 / 247

C o n f i g u r a t i o n 4-81
1
Type
“P”
on the DHCP Server Configuration menu to select Configure
DHCP Address Range Pool. The IAD displays the current High IP address
and prompts you to enter a new one.
2
Type the new High IP address and press Enter. The IAD displays the current
Low IP address and prompts you to enter a new one.
3
Type the new Low IP address and press Enter. The IAD displays the DHCP
Server Configuration menu.
Configure DHCP Client Entry
You can configure up to 10 static DHCP client entries by following the steps
below.
1
Type
“C”
on the DHCP Server Configuration menu to configure DHCP
Client Entry settings. The IAD displays the gateway address and prompts
you to enter the Client entry number to configure.
2
Type the client entry number you’re configuring, and press Enter. The IAD
displays the current Mac address for this entry and prompts you to enter a
new one.
3
Type the MAC address in the template provided. The IAD displays the
current Host name and prompts you to enter a new one.
4
Type the new host name and press Enter. The IAD displays an update
option. Type
“Y”
to override the Lease Time default for this entry,
“N”
to
use the default value, or proceed to Step 5.
5
Type the lease time for this entry and press Enter. The IAD displays an
update option. Type
“Y”
to override the IP address default value,
“N”
to
use the default value, or proceed to Step 6.
6
Type the IP address for this entry and press Enter. The IAD displays an
update option. Type
“Y”
to override the Subnet Mask address default value,
“N”
to use the default value, or proceed to Step 7.
7
Type the Subnet Mask for this entry and press Enter. The IAD displays an
update option. Type
“Y”
to override the default gateway,
“N”
to use the
default value, or proceed to Step 8.
8
Type the default gateway address for this entry and press Enter. The IAD
displays an update option. Type
“Y”
to override the DNS Server IP address
default value,
“N”
to use the default value, or proceed to Step 9.
9
Type the default DNS Server IP address for this entry and press Enter. The
IAD displays an update option. Type
“Y”
to override the NetBIOS Server
IP address default value,
“N”
to use the default value, or proceed to Step 10.
10
Type the default NetBIOS Server IP address for this entry and press Enter.
The IAD displays an update option. Type
“Y”
to override the NetBIOS
Node Type default value,
“N”
to use the default value, or proceed to Step
11.