Paradyne JetFusion 2208, User Manual

Page: 76 / 247

4-20 2 0 0 0 - A 2 - G B 2 1 - 1 0
Add New PVC
To add a new PVC, follow the steps below.
1
On the ATM PVC Configuration menu, type
“1”
. The IAD prompts you to
enter the VPI.
2
Type a VPI value between 0 and 255 (default 0) and press Enter. The IAD
then prompts you for the VCI.
3
Type a VCI value between 32 and 65535 and press Enter. The IAD displays
the ATM Encapsulation Configuration menu as shown in Figure 4.24.
Figure 4.24
ATM Encapsulation Configuration Menu
4
Type the option for the encapsulation to configure for this PVC. If you
select RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364
(PPPoATM using VC Muxing), follow the on-screen messages to set the
PPP authorization type. The IAD displays the ATM Service Category
Configuration menu (Figure 4.25).
Figure 4.25
ATM Service Category Configuration Menu
5
Type
“1”
to select CBR for high priority data
−
or
−
Type
“2”
to select UBR for low priority data. The IAD displays the ATM
Peak Cell Rate (PCR) Configuration menu (Figure 4.26).