Paradyne JetFusion 2208, User Manual

Page: 246 / 247

2000-A2-GB21-10 - IX-4 - July 2004
SDSL auto cycle speed table 4-8
SDSL Diagnostics menu 7-5
SDSL interface mode, setting 4-8
SDSL speed, setting for IMAS DSLAM 4-7
SDSL speed, setting manually 4-7
security level
default passwords for 3-2
privileges 3-1
set bridge global CLI command 6-3
set bridge stp global CLI command 6-3
set dhcp server dns CLI command 6-3
set dhcp server domain CLI command 6-4
set dhcp server enable CLI command 6-3
set dhcp server gateway CLI command 6-3
set dhcp server netbios CLI command 6-3
set dhcp server range CLI command 6-4
set dhcp server subnet CLI command 6-3
set dns server address CLI command 6-4
set ip default route CLI command 6-4
set ip route CLI command 6-4
set lan bridge CLI command 6-4
set lan ip address CLI command 6-5
set lan rip CLI command 6-5
set lan stp bridge CLI command 6-6
set mgcp bracketing CLI command 6-6
set mgcp listening port CLI command 6-6
set mgcp signaling connection CLI Command 6-6
set mgcp signaling port CLI Command 6-7
set mgcp signaling tos CLI Command 6-7
set mgcp voice connection CLI Command 6-7
set mgcp voice tos CLI Command 6-7
set nat CLI Command 6-7
set sdsl speed CLI Command 6-8
set system defaults CLI Command 6-8
set wan atm ppp auth CLI Command 6-8
set wan atm vc CLI Command 6-8
set wan datalink CLI Command 6-9
set wan framerelay CLI Command 6-10
set wan ip address CLI Command 6-10
set wan rip CLI Command 6-10
set wan stp bridge CLI Command 6-11
show configuration CLI Command 6-11
show dhcp server configuration CLI Command 6-11
show ip routes CLI Command 6-11
SLIC control mode
setting 4-77
SNMP
disabling for IP and EOC 3-7
enabling and disabling via EOC 3-7
enabling and disabling via IP 3-6
enabling for IP and EOC 3-7
MIB support for 3-6
System Contact, configuring 3-7
System Location, configuring 3-8
System Name, configuring 3-8
Trap Host IP address, configuring 3-8
SNMP over EOC (AAL2/LES) 3-5
SNMP Traps 3-9
SNMP traps 3-6
SNMP traps, restart max delay 3-9
Spanning Tree Bridge priority, configuring 4-52
start mode
displaying 4-73
ground start 4-73
loop start 4-72
setting 4-72
Start Mode Selection menu 4-72
static route
adding 4-37
removing 4-38
STP
enabling and disabling by port 4-52
enabling and disabling globally 4-51
sync delay, setting in Lucent DSLAM 4-7
system defaults, setting 3-16
system settings, saving 3-16
system software
identifying version 3-13
System Uptime report 5-31
T
T1 Interface 4-9
TCP Statistics report 5-10
telephone devices
connecting to IAD 2-12
Telephones
connecting 2-11
Telnet
connecting 2-9
server port, configuring 4-43
Telnet Server, configuring port for 4-43
terminal emulator, connecting 2-2
TFTP
to transfer files 3-20
used to upgrade 3-12
using to upgrade IAD system 3-12
tftp receive CLI Command 6-11
TFTP Servers, LAN or WAN 3-12
timeout period, setting 3-15
trace route, using 3-15
transmit and receive channels, configuring for T1 4-12
Transmit CIR, configuring for DLCI 4-27
Transmit Clock Source, configuring for T1 4-13
troubleshooting, generally 7-5
U
UDP Statistics report 5-12
Uninterruptible Power supply-see UPS
Universal Serial Interface port 2-12
upgrading IAD system software 3-12
UPS 2-2
user ID
changing 3-3
limits of 3-2
using with RADIUS Server 3-4
USI
connecting to IAD 2-12
V
Voice Configuration menu 4-55
voice gateway
selecting 4-55
voice path
configuration, generally 4-55
setup, basic tasks 4-55
W
WAN
connecting 2-11
connecting to IAD 2-12
WAN configuration, flowchart for xDSL 4-2