Paradyne JetFusion 2208, User Manual

Page: 70 / 247

4-14 2 0 0 0 - A 2 - G B 2 1 - 1 0
Change to E1 Mode
Type
“9”
on the T1 Configuration menu (Figure 4.9) to switch from T1 to
E1 mode (Figure 4.15).
Figure 4.15 E1 Configuration Menu
Select Frame/CRC4
Mode
Type
“1”
on the E1 Configuration menu to display the E1 Frame Mode
menu (Figure 4.16). From this menu, you may select the framing for the
network side of the DSU/CSU (default is FAS).
Figure 4.16
E1 Frame Mode Menu
Configure S-Bits Type
“4”
on the E1 Configuration menu to display the Configure S-Bits
menu (Figure 4.17). Toggle to display the status of special bits found in
timeslot zero.