Paradyne JetFusion 2208, User Manual

Page: 15 / 247

P r e f a c e ix
P
REFACE
About this Manual
This reference guide for the 2208, 2304, and 2308 IADs describes features
and specifications, configuration, and cabling. This manual is designed to be
used as a reference regarding commands, interface ports, configuration
parameters, and other information specific to your IAD.
Manual Organization
The chapters and appendices in this manual are arranged for quick reference
when you need it. We recommend that you first read the Quick Start Guide
and then refer to the remaining chapters for more detailed information.
Appendices are designed to complement the main chapters.
•
Chapter 1, "Introduction" – introduces the features of the 2208, 2304, and
2308 IADs, including the hardware, indicators, and ports.
•
Chapter 2, "Quick Start Guide" – describes the process of getting an IAD up
and running in a typical customer premises. This chapter is helpful if you’re
new to Paradyne IADs, because it lists each step, beginning with unpacking
the IAD. It also provides information about logging on, using the menu
interface, setting the IP address, basic configuration tasks, and restarting the
IAD. The subsequent chapters provide more detailed information.
•
Chapter 3, "Administration" – provides information about security,
configuring Simple Network Management Protocol (SNMP), upgrading
ACOS, system utilities, and other topics.
•
Chapter 4, "Configuration" – details how to configure the IADs for physical
connection to the network (T1/E1 and SDSL, frame relay and ATM, and
TDM voice for channelized T1/E1 circuits) as well as router, bridge, voice
path, firewall, DHCP, Multicast, and NAT configuration.
•
Chapter 5, "Reports"
−
describes the reports you can run.
•
Chapter 6, "Command Line Interface" – describes how to enter and exit CLI
mode, and how to use each command in the command line interface. You
may use these commands instead of using the corresponding commands in
the menu interface.