Paradyne JetFusion 2208, User Manual

Page: 153 / 247

C o n f i g u r a t i o n 4-97
1
Type
“X”
on the NAT Configuration menu. The IAD prompts for the IP
address.
2
Type the IP address to delete and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Delete NAT Local Server Entry
To delete a local server entry, follow the steps below:
1
Type
“Y”
on the NAT Configuration menu. The IAD prompts for the entry
number to delete.
2
Type the number of the table entry and press Enter. The IAD displays the
following:
Deleting NAT Local Server entry 1, Translated IP address
115.3.3.1
Translated Port 2, Standard Port 3
The IAD updates the table, and displays the NAT Configuration menu.
Delete NAT Alias Entry
To delete a NAT alias entry, follow the steps below.
1
Type
“Z”
on the NAT Configuration menu. The IAD prompts for the alias
entry to delete.
2
Type the number of the entry and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Setting Derived Timing Options
Use the Derived Timing options to enable and disable Derived Timing, and to
debug Derived Timing.
Derived Timing Menu
To configure Derived Timing settings, type
“T”
(Telephony Clock Recovery)
on the Main menu, which will bring up the Derived Timing menu (Figure
4.88).
Figure 4.88 Derived Timing Menu
Each of the options on this menu is described in detail below.