Paradyne JetFusion 2208, User Manual

Page: 78 / 247

4-22 2 0 0 0 - A 2 - G B 2 1 - 1 0
AAL5 or AAL0
1
Type
“1”
on the ATM Encapsulation Configuration menu (Figure 4.24) to
select AAL5, or
“2”
to select AAL0 encapsulation. The IAD displays the
ATM Service Category Configuration menu (Figure 4.25).
2
Type
“1”
to select CBR for high priority data
−
or
−
Type
“2”
to select UBR for low priority data. The IAD displays the Peak
Cell Rate Configuration menu (Figure 4.26).
3
Type the PCR value or press Enter to set the PCR to the maximum rate for
the current line speed. The IAD saves the configuration and displays the
ATM PVC Configuration menu.
Proprietary Voice
Encapsulation
Type
“3”
on the ATM Encapsulation Configuration (Figure 4.24) menu to
select Proprietary Voice encapsulation over a specific PVC. The IAD saves
the configuration and displays the ATM PVC Configuration menu.
NOTICE:
Proprietary Voice Encapsulation is used for Copper Com and Jetstream
voice PVCs only.
RFC 1483 (VC
Muxing) or RFC 1483
(LLC Encapsulation)
1
Type
“4”
on the ATM Encapsulation Configuration (Figure 4.24) menu to
select RFC 1483 encapsulation with VC Muxing or type
“5”
to select RFC
1483 with LLC encapsulation. The IAD displays the ATM Service
Category Configuration menu (Figure 4.25).
2
Type
“1”
to select CBR
−
or
−
Type
“2”
to select UBR. The IAD displays the Peak Cell Rate
Configuration menu (Figure 4.26).
3
Type the PCR value or press Enter to set the PCR to the maximum rate for
the current line speed. The IAD saves the configuration and displays the
ATM PVC Configuration menu (Figure 4.23).
Options 4 and 5 on the ATM Encapsulation Configuration menu (RFC 1483
using VC Muxing) support routing and bridging.
RFC 2364 (PPPoATM
with LLC
Encapsulation) or RFC
2364 (PPPoATM using
VC Muxing)
1
Type
“6”
on the ATM Encapsulation Configuration menu (Figure 4.24) to
select RFC 2364 (PPP0ATM with LLC encapsulation) or type
“7”
to select
RFC 2364 (PPP0ATM with VC Muxing).