Paradyne JetFusion 2208, User Manual

Page: 150 / 247

4-94 2 0 0 0 - A 2 - G B 2 1 - 1 0
1
Type
“A”
on the NAT Configuration menu to select Configure NAT Alias
Entry. The IAD displays the next unassigned entry and prompts you to enter
the NAT Alias Entry to configure.
2
Type the number of the alias entry to configure. The IAD displays the
current local IP address and prompts you to enter a new NAT Alias Local IP
Address.
3
Type the IP address of the device on the LAN. (It must be a statically
assigned IP address; do not use DHCP to assign this address.) The IAD
displays the current Internet IP Address and prompts you to enter a new one.
4
Type the new NAT alias IP address and press Enter. The IAD displays the
information you’ve entered and updates the configuration.
5
When the operation is complete, press any key to display the NAT
Configuration menu.
6
Continue with other NAT configuration tasks, or press Escape to return to
the Main menu.
Display NAT Statistics
When NAT is enabled, you can review statistics gathered as NAT operates.
To display NAT statistics, type
“S”
on the NAT Configuration menu. Press
any key to return to the NAT Configuration menu.
Report Entry Description
Timeouts TCP and UDP Timeout values.
Local to inet Number of packets and bytes transferring to the Internet.
inet to Local Number of packets and bytes receiving from the Internet.
Connections Number of active TCP, UDP and ICMP connections, as well as
the number created and deleted.
Total Fragments Total fragments: local to internet, and internet to local
First Fragments Number of first fragments: local to internet, and internet to
local
Queued Fragments Number of queued fragments: local to internet, and internet to
local
Deleted Fragments Number of queued fragments: local to internet, and internet to
local
Fragment Entries Number of created and deleted fragment entries.
Errors Number of checksum, retries and bad packets.
Total IP packets Number of IP packets—reserved addresses and discarded
packets.