Paradyne JetFusion 2208, User Manual

Page: 58 / 247

4-2 2 0 0 0 - A 2 - G B 2 1 - 1 0
•
Configure the WAN interface for your IAD (page 4-4)
•
Select ATM or Frame Relay as the datalink protocol (page 4-3)
•
For ATM protocol, configure ATM PVCs (page 4-19) and ATM options
(page 4-24)
•
For Frame Relay protocol, configure Frame Relay DLCIs (page 4-26) and
Frame Relay options (page 4-29)
•
Configure the voice path (page 4-55).
Use the flowchart below to plan your tasks for configuring either SDSL (2304
or 2308) or T1/E1 (2208).
Figure 4.1
WAN Configuration Flowchart
Setting the WAN Port IP Address
Before you configure the WAN port IP address, you must get the proper IP
address and subnet mask address identified for Internet access by your
network administrator.
System Defaults
Physical
Interface
Data Link
ATM Options
ATM
Define
PVCs
Frame
Relay
FR Options
Define
DLCIs
Bridge
IP over Bridge
IP
Voice
Select
Voice
Gateway
Configure
Voice
App.
Data Data
Bridge
IP over Bridge
IP
Voice
Select
Voice
Gateway
Configure
Voice
App.