6 Work with files
LP-400/LP-V setting categories
Setting categories in Laser Marker NAVI smart
Marking character
Reference character strings
Character condition
Character object settings
Bar code object settings
Bar code condition
2D code object settings
Logo condition
Graphic object settings
Processing condition
Shape object settings
Point radiation condition
Point radiation object settings
File settings
General condition
Object group settings
Function setting
Function settings
Function settings for all files
Common setting
Reference character strings for all files
Laser settings
Laser setting
Object group settings
On-the-fly marking
Trigger setting
File settings
In the converted files, the parameters for “Marking settings” > “File settings” > “Compatibility
with former models” are the same as the settings of the source data.
Object number and object group number
The object numbers of the marking data are assigned to the numbers shown in the following
table. These numbers can be used with LP-400/LP-V compatible command mode. The
marking data converted from LP-400/LP-V files and data set by LP-400/LP-V compatible
command mode are assigned to the object group number 1000. If another object number
or object group number is set, the marking data cannot be controlled by the LP-400/LP-V
communication commands.
Object type
Object number
Character object (reference list type)
1001–1060
Bar code object, 2D code object
1100–1107
Graphic object
1200–1215
Shape object
1300–1315
Point radiation object
1400–1415
Object group
1000
ME-NAVIS2-OP-1
81
