manualshive.com logo in svg

Panasonic LP-RF Series, Operation Manual

The Panasonic LP-RF Series is a remarkable product that combines the convenience of a turntable, cassette player, and radio in one sleek design. With its easy-to-use operation manual available for free download from manualshive.com, users can effortlessly enjoy their favorite music and relish in the nostalgia of analog formats.

Share
Download
background image

 22 Laser settings

In the dialog, configure any of the following settings:

• “Application”:

The list box items vary depending on the connected laser marking system.

‒ LP-GS (marking): “PCB (Faint marking)”, “PCB (Deep marking)” (LP-GS051, LP-

GS051-L), “Epoxy coated component”, “Resin (Black)”, “Paper (layer removal)”,
“Paper (dark marking)” (LP-GS051, LP-GS051-L)

‒ LP-RC (marking): “Paper (layer removal)”

LP-RF, LP-RV: For “Application”, select “Marking” or “Processing”. Then select the
marking or processing application from the list box.

‒ LP-RF (marking): “Aluminum (shallow engraving)”, “Aluminum (deep engraving)”,

“Iron/Stainless steel (shallow engraving)”, “Iron/Stainless steel (deep engraving)”,
“Acrylonitrile butadiene styrene (Black)”, “Acrylonitrile butadiene styrene (White)”,
“Polybutylene terephthalate (Black)”, “Polybutylene terephthalate (White)”,
“Polyoxymethylene (Black)”, “Polyoxymethylene (White)”, “Polypropylene (Black)”,
“Polypropylene (White)”, “Polycarbonate (Black)”, “Polycarbonate (White)”

‒ LP-RV (marking): “Aluminum (shallow engraving)”, “Aluminum (deep engraving)”,

“Iron/Stainless steel (shallow engraving)”, “Iron/Stainless steel (deep engraving)”,
“Acrylonitrile butadiene styrene (Black)”, “Acrylonitrile butadiene styrene (White)”,
“Polybutylene terephthalate (Black)”, “Polybutylene terephthalate (White)”,
“Polyoxymethylene (Black)”, “Polyoxymethylene (White)”, “Polypropylene (Black)”,
“Polypropylene (White)”, “Polycarbonate (Black)”, “Polycarbonate (White)”, “Epoxy
coated component”

‒ LP-RF, LP-RV (processing): “Surface removal”, “Cutting of cable shield”

• “Contrast (marking time)”: The parameter is available for marking applications.

Use the slider to adjust the marking contrast. Set a low contrast by moving the slider to
the left in the direction of “Low (short)”. To set a high contrast, move the slider to the right
in the direction of “High (long)”. The higher the contrast the longer marking takes.

(1)

(2)

(3)

(1) “Low (short)”
(2) “Base”
(3) “High (long)”

• “Laser power (marking depth)”:

The parameter is available for marking applications. Use the slider to adjust the laser
power. Set a high laser power by moving the slider to the right in the direction of “High
(deep)”. A higher laser power results in a deeper marking. To set a low laser power, move
the slider to the left in the direction of “Low (shallow)”.

• “Number of overwritings” (LP-RF, LP-RV):

The parameter is available for processing applications.
Specify how many times the setting data is processed with one single trigger. The larger
the specified number the longer the processing takes.

ME-NAVIS2-OP-1

 235

Summary of Contents for LP-RF Series







































































































































































































































































































































































Reviews:

No comments

Related manuals for LP-RF Series

Vahle VCL Series Translation Of The Original Operating Instructions preview
VCL Series
Brand: Vahle Pages: 96
Eaton Power Xpert C445 Manual preview
Power Xpert C445
Brand: Eaton Pages: 2
ABB RELION Series Product Manual preview
RELION Series
Brand: ABB Pages: 33
Twiflex GMR-H Quick Start Manual preview
GMR-H
Brand: Twiflex Pages: 5
Murata GQM2195C2E7R5CB12D Reference Sheet preview
GQM2195C2E7R5CB12D
Brand: Murata Pages: 25
Mecc Alte spa TR1 Series Use And Maintenance Manual preview
TR1 Series
Brand: Mecc Alte spa Pages: 12
7starlake SR800 User Manual preview
SR800
Brand: 7starlake Pages: 49
Eaton MODAN 6000 Instruction Leaflet preview
MODAN 6000
Brand: Eaton Pages: 8
Danfoss iSave 40 Operation Manual preview
iSave 40
Brand: Danfoss Pages: 101
DCD 50500-010 Installation And Operating Specification preview
50500-010
Brand: DCD Pages: 4
Jäger C80-M440.01 S4 Manual preview
C80-M440.01 S4
Brand: Jäger Pages: 32
Jäger F120-H824.11 S11RW2V Manual preview
F120-H824.11 S11RW2V
Brand: Jäger Pages: 52
El-Björn TFUC Connect 1600kW Manual preview
TFUC Connect 1600kW
Brand: El-Björn Pages: 76
FIELD OF VIEW GeoSnap Basic Manual preview
GeoSnap Basic
Brand: FIELD OF VIEW Pages: 34
MIR 250 Shelf Carrier User Manual preview
250 Shelf Carrier
Brand: MIR Pages: 249
Grizzly G0792 Owner'S Manual preview
G0792
Brand: Grizzly Pages: 44
Jäger Z120-H824.12 S11W2V Manual preview
Z120-H824.12 S11W2V
Brand: Jäger Pages: 44
ZIEHL STW164IP Operating Manual preview
STW164IP
Brand: ZIEHL Pages: 30

Brands by name

Popular brands

Load more brands