Panasonic AV-HS60C1E, Operation Manual

Page: 126 / 206

– 126 –
Chapter 6 Input/Output Signal Settings — Setting output signals
Item Description
System image
(HD)
Output image
(SD)
[Squeeze]
Reduces the image both horizontally and vertically so that the
aspect ratio is set to 4:3.
[Edge Crop]
Maintains the aspect ratio of the image, and reduces the
image in accordance with the vertical resolution. The image is
cropped at the left and right.
[Letter]
Maintains the aspect ratio of the image, and reduces in
accordance with the horizontal resolution. Black images are
added at the top and bottom.
5
Select an item in [Delay] in the [SDI OUT 14]/[SDI OUT 16] column.
f
Set the delay time of the output.
[90H] ([75H])
When the system format is 1080/59.94i, the image is delayed from the system image (HD) by 90H, and output.
When the system format is 720/59.94p, the image is delayed from the system image (HD) by 90H+1F, and output.
When the system format is 1080/50i, the image is delayed from the system image (HD) by 75H, and output.
When the system format is 720/50p, the image is delayed from the system image (HD) by 75H+1F, and output.
When the system format is 1080/50i or 720/50p, 75H is displayed in the menu.
[1F]
The image is output in-phase with a delay of 1 frame from the system image (HD). For details on the phase and delay
amount, refer to “Setting the output phase” (page 141).
6
Select an item from [1] to [5] in [Sharp] in the [SDI OUT 14]/[SDI OUT 16] column.
f
Set the extent of the edge sharpness for the images. Set this closer to [5] for sharper edges.