Panasonic AV-HS60C1E, Operation Manual

Page: 34 / 206

– 34 –
Chapter 4 Preparations — Turning power on/off
4
Select the <SYS> button
→
[MAINTENANCE]
→
[Boot] tab
→
[Initial] column
→
[Initial] button.
5
Select [OK] in the confirmation screen.
The AV-HS6000 is initialized.
Go on to the procedure in “To perform the version update of the software” (page 34).
r
To perform the version update of the software
Check the latest software information and perform the version update of the software if necessary.
1
Check the <SYS> button → [MAINTENANCE] → [Status] tab → [System Version] column → [System Version].
2
Perform the version update of the software if necessary.
Check the latest software information in the following website, and perform the software version update if necessary.
http://pro-av.panasonic.net/ (English only)
f
The Control Panel AV-HS60C4 operates normally only when the version of the software is 3.10-00-0.00 or later.
Be sure to perform the version update if the version of the software checked in step
1
is earlier than 3.10-00-0.00.
Turning power off
1
Set the <POWER> switches of the Main Frame AV‑HS60U1/AV‑HS60U2 and the Control Panel AV‑HS60C1/AV‑HS60C2/AV‑HS60C4
to <OFF>.
f
For the redundant power supply model (AV-HS60U2, AV-HS60C2/AV-HS60C4), set both <POWER> switches of the power supply 1 and the power
supply 2 to <OFF>.
f
The power indicator will go off when power is cut off.
@ @ NOTE
t
Do not turn off the power when accessing the memory card or the Storage Module AV-HS60D1 (optional). Data in the memory card may be damaged.
t
When turning off the power and turning it on again, the unit is started with the settings at the time when the power is turned off except for the image
data of VMEM (video memory). (page 157)
Note that, in the following items, the changed settings will be backed up at approximately 60-second intervals in the non-volatile memory, and the
settings at the time of shutdown will be restored, but the settings changed within approximately 60 seconds before turning off the power may not be
updated. To update securely, do not change settings within approximately 60 seconds before turning off the power.
- Background wipe preset
- Key source preset