Panasonic AV-HS60C1E, Operation Manual

Page: 82 / 206

– 82 –
Chapter 5 Basic Operations — USK (Upstream key)
2
Select an item in [Source Type] in the [USK] column.
f
Select the mode to link selection of key source signal with key fill selection. The selection status is stored for each source signal.
[Self Key] Uses the source selected in the key fill bus column as the key source signal.
[External Key] Always uses an external key. The source signal for fill is set using [Fill] in the [Key] column.
Selecting the fill type
Select the fill type.
1
Select the <DSK MISC> button
→
[USK]
→
[USK1] to [USK4] tabs.
2
Select an item in [Fill] in the [USK] column.
[Bus] Uses the bus signal for the key fill signal.
[Matte] Uses the internal fill matte for the key fill signal. The color set in the [Fill Matte] column is used for the fill matte color.
Setting the matte color
Set the fill matte color.
1
Select the <DSK MISC> button → [USK] → [USK1] to [USK4] tabs.
2
Adjust the color.
f
Set [Hue], [Sat], [Lum], or [Color Palette] in the [Fill Matte] column.
Selecting the USK source
Select the key fill and key source signals to be used as USK sources.
1
Select the <DSK MISC> button
→
[USK]
→
[USK XPT] tab.
2
Select USK bus from the USK bus list on the left column.
f
Select [USK] to filter the bus list in the left column.
3
Select signals.
f
Select a signal to be assigned to the USK bus from the signal list on the right column.
f
Signals available on the USK bus are as follows.
Signal name Description of signal
SDI IN1 - SDI IN32 SDI input signals 1 to 32
DVI IN1, DVI IN2 DVI-D input signals
Still 1V, Still 2V, Still 3V, Still 4V Video memory (still image) 1 to 4 videos
Still 1K, Still 2K, Still 3K, Still 4K Video memory (still image) 1 to 4 keys
Clip 1V, Clip 2V, Clip 3V, Clip 4V Video memory (moving image) 1 to 4 videos
Clip 1K, Clip 2K, Clip 3K, Clip 4K Video memory (moving image) 1 to 4 keys
CBGD1, CBGD2 Color background 1, 2
CBAR Color bar
Black Black image
f
Select [Filter] to filter the signal list in the right column.
4
Select [Assign].
f
The signal is assigned to the USK bus selected in the step
2
.
Setting the USK insert
Perform USK settings for each input signal.
1
Select the <DSK MISC> button
→
[USK]
→
[USK Insert] tab.
2
Select signals.
f
Select the signal you want to perform USK settings on from the signal list on the left column.
f
Select [Filter] to filter the signal list on the left column.
f
Signals that can be combined with a USK source are as follows:
Signal name Description of signal
SDI IN1 - SDI IN32 SDI input signals 1 to 32
DVI IN1, DVI IN2 DVI-D input signals
Still 1V, Still 2V, Still 3V, Still 4V Video memory (still image) 1 to 4 videos
Still 1K, Still 2K, Still 3K, Still 4K Video memory (still image) 1 to 4 keys
Clip 1V, Clip 2V, Clip 3V, Clip 4V Video memory (moving image) 1 to 4 videos
Clip 1K, Clip 2K, Clip 3K, Clip 4K Video memory (moving image) 1 to 4 keys