manualshive.com logo in svg

Panasonic AV-HS60C1E, Operation Manual

Share
Download
Panasonic AV-HS60C1E Operation Manual Download Page 172

– 172 –

Chapter 10 External Interfaces — Plug‑in software

Plug‑in software

The unit allows plug-in software to be registered and functions to be added.
Plug-in software can be registered, deleted, or started through the <PLUG IN> button on the top menu 

→

 [PLUGIN Maint] 

→

 [Configuration]/[Load] tab.

 

f

For detailed information regarding the plug-in software, consult your dealer.

1 

Select the <PLUG IN> button 

→

 [PLUGIN Maint] 

→

 [Configuration]/[Load] tab.

2 

Select an item in [Enable on boot] in the column which displays the name of the plug‑in to be set.

 

f

Set whether to start the plug-in software when the unit is started up.

 

f

The [Enable on boot] setting takes effect the next time the unit is started up.

[On]

The plug-in software is started up when the unit is started up.

[Off]

The plug-in software is not started up when the unit is started up.

3 

Select an item in the column which displays the name of the plug‑in to be set.

[Version]

Displays the plug-in software version.

[Delete]

Deletes the plug-in software from the internal memory.

 

f

The corresponding plug-in software is deleted the next time the unit is started up.

[SD Load]

Loads the program from the memory card.

 

f

By registering the plug‑in software, individual menu operation defined using the plug‑in software becomes available.

 

f

When you have loaded plug-in software, turn off the power, and restart the unit.

[Local Load]

Loads the plug-in software saved in the computer.

 

f

By registering the plug‑in software, individual menu operation defined using the plug‑in software becomes available.

 

f

This function is available only in computers connected to the <LAN> terminal.

 

f

When you have loaded plug-in software, turn off the power, and restart the unit.

Summary of Contents for AV-HS60C1E















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands