Panasonic AV-HS60C1E, Operation Manual

Page: 70 / 206

– 70 –
Chapter 5 Basic Operations — KEY
[Off] Does not adjust the width of the chroma key signal.
[0.5], [1.0], [1.5]
Adjusts the width of the chroma key signal. The key signal width can be adjusted horizontally in 0.5 (half-pixel)
increments.
3
Set [Phase] in the [Adjust] column.
f
Adjust the horizontal phase of the chroma key signal. The key signal position can be adjusted horizontally in 0.5 (half-pixel) increments.
Key decorations
Add a border, shadow, or other edge to the key.
Setting the key edge
(Top)
[Border] [Drop]
[Shadow] [Outline]
(Bottom)
(Left) (Right)
Fig. 1 Fig. 2
[180] [225] [270]
[135] [315]
[90] [45] [0]
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Select an item in [Type] in the [Edge] column. (Fig. 1)
[Off] Does not add an edge.
[Border] Adds a border around the entire edge.
[Drop] Adds a diagonal border.
[Shadow] Adds a shadow.
[Outline] Adds an outline (only a border with no fill).
3
Set [Width] in the [Edge] column.
f
Set the edge width.
4
Select an item in [Direction] in the [Edge] column. (Fig. 2)
f
Set the direction to add [Drop] or [Shadow] effect in 45 ° increments.
5
Set [Density] in the [Edge] column.
f
Set the edge density.
Setting the key edge fill
Set the source to be inserted as an edge.
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Select an item in [Fill] in the [Edge] column.
[Matte] Uses the color set in the [Edge Color] column.
[UTIL1] Uses the image on the UTIL1 bus.
[UTIL2] Uses the image on the UTIL2 bus.
Setting the key edge color
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Setting] tab.
2
Adjust the color.
f
Set [Hue], [Sat], [Lum], or [Color Palette] in the [Edge Color] column.